content is empty!
Y28-400/630
TSD
Double Action Hydraulic Drawing Press
Y28-400/630
Characteristics:
- Straight-side structure with double slide, the slide with 8-flod guide way features
- Double slide can mechanical lock for single action
- Various way of rolling bolster: Front, lateral, T-travel type
- Full digital control of pressure parameters, pressure closed loop control
- Blank holder slide pressure subsection control
- Mould parameter storage and the failure diagnosis
- Full arrange of safety device and safety control system
- High efficiency of cooling device, suitable for continuous production
- No-pressure mould alignment, convenient for aligning mould
Options
- Proportional regulation for slide speed and cushion force
- Cushion pressure subsection control
- Light curtain safety device
- Oil heating/cooling unit
- Die protection unit
- Displacement sensor
- Industry touching screen monitor
- Upper ejecting device (hydraulic or mechanical type)
- Floating guide-way and rolling bracker for die exchange
- Working area lighting
- Power socket
- Non-recycling lubrication system controlled by computer
- Quick die clamping device
Name | Unit | Y28-25 | Y28-80/120 | Y28-100/180 | Y28-150/200 | Y28-100/350 | Y28-200/315 | Y28-250/400 | ||||||||||
Nominal force | KN | 250 | 1200 | 1800 | 2000 | 3500 | 3150 | 4000 | ||||||||||
Drawing force | KN | 800 | 1000 | 1500 | 1000 | 2500 | ||||||||||||
Blank-holding | KN | 800 | 500 | 2500 | 1000 | 1500 | ||||||||||||
Cushion /ejector force | KN | 400 | 315 | 500 | 630 | 630 | 1000 | |||||||||||
Knockout force | KN | 50 | 315 | |||||||||||||||
Stroke of drawing slide | mm | 220 | 410 | 710 | 570 | 750 | 800 | 800 | ||||||||||
Stroke of blank hold slide | mm | 350 | 600 | 350 | 350 | |||||||||||||
Cushion/ejector Stroke | mm | 1801 | 250 | 300 | 300 | 300 | ||||||||||||
Drawing sliden area | L-R | mm | 400 | 500 | 630 | 790 | 1200 | 1340 | ||||||||||
F-B | mm | 420 | 560 | 630 | 920 | 1200 | 540 | |||||||||||
Blank holder slide area | L-R | mm | 380 | 1200 | 800 | 1400 | ||||||||||||
F-B | mm | 380 | 1200 | 600 | 600 | |||||||||||||
Cushion area | L-R | mm | 510 | | ||||||||||||||
F-B | mm | 450 | ||||||||||||||||
Table area | L-R | mm | 640 | 500 | 630 | 790 | 1200 | 1200 | 1200 | |||||||||
F-B | mm | 420 | 600 | 630 | 920 | 1200 | 1200 | 1200 | ||||||||||
Daylight of drawing slide | mm | 660 | 1460 | 870 | 1600 | 1500 | 1500 | |||||||||||
Daylight of blank holder slide | mm | |||||||||||||||||
Speed of drawing slide | Descent | mm/s | 100 | 800 | ≥280 | 160 | 52 | ≥100 | ≥100 | |||||||||
Pressing | mm/s | 20 | 40-10 | 14-25 | 5-17 | 10 | 10 | |||||||||||
Return | mm/s | 50 | 120 | 130/200 | 180 | 100 | 50 (slow)100(fast) | siow50/fast100 | ||||||||||
Speed of drawing slide | Descent | mm/s | 100 | ≥100 | ≥100 | |||||||||||||
Pressing | mm/s | 50 | 10 | 10 | ||||||||||||||
Return | mm/s | 50 (slow)100(fast) | slow50/fast100 | |||||||||||||||
Overall dimensions | L-R | mm | 1860 | 2040 | 2300 | 2310 | 4400 | 4150 | 4950 | |||||||||
F-B | mm | 750 | 720 | 900 | 950 | 2500 | 1300 | 1500 | ||||||||||
Height | mm | 1650 | 2860 | 4250 | overground 4242 underground 1100 | 4850 | overground 5290 underground 800 | |||||||||||
Total power of the motor | KW | 4 | 15 | 22 | 22 | 24 | 44 | 44 |
Name | Unit | Y28-200/500 | Y28-400/630 | Y28-500/800 | Y28-630/1030 | Y28-800/1300(A) | Y28-1200/2000 | Y28-1600/2400 | ||||||||||
Nominal force | KN | 5000 | 6300 | 8000 | 10300 | 13000 | 20000 | 24000 | ||||||||||
Drawing force | KN | 4000 | 5000 | 6300 | 8000 | 12000 | 16000 | |||||||||||
Blank-holding | KN | 2000 | 2300 | 3000 | 4000 | 5000 | 8000 | 8000 | ||||||||||
cushion /ejector force | KN | 1000 | 1000 | 1600 | 2500 | 2500 | 5000 | 5000 | ||||||||||
Knockout force | KN | 500 | 200= 20*2*5 | |||||||||||||||
Stroke of drawing slide | mm | 900 | 1100 | 1300 | 1300 | 1400/1300 | 1500 | 1500 | ||||||||||
Stroke of blank hold slide | mm | 500 | 1000 | 1200 | 1200 | 1400/1200 | 1200 | 1200 | ||||||||||
Cushion/ejector Stroke | mm | 350 | 300 | 300 | 350 | 650/350 | 400 | 400 | ||||||||||
Drawing sliden area | L-R | mm | 1200 | 1600 | 2200 | 2500 | 2700 | 3800 | 2800 | |||||||||
F-B | mm | 1400 | 1000 | 1700 | 1500 | 1600 | 1900 | 1600 | ||||||||||
Blank holder slide area | L-R | mm | 450 | 2600 | 3200 | 3200 | 2500/2400 | 4500 | 3500 | |||||||||
F-B | mm | 1800 | 2400 | 2200 | 2200 | 2500 | 2200 | |||||||||||
Cushion area | L-R | mm | 2150 | 2000 | | 1500/2500 | 3600 | 2365 | ||||||||||
F-B | mm | 1250 | 1500 | 1420 | 1500/1500 | 1850 | 1450 | |||||||||||
Table area | L-R | mm | 1200 | 2600 | 3200 | 3200 | 2500/4000 | 4500 | 3500 | |||||||||
F-B | mm | 1400 | 1800 | 2400 | 2200 | 2200 | 2500 | 2200 | ||||||||||
Daylight of drawing slide | mm | 1500 | 1800 | 1800 | 2200 | 2300/2000 | 2100 | 2200 | ||||||||||
Daylight of blank holder slide | mm | 1700 | 1800 | 2200 | 2300/2000 | 1800 | 1900 | |||||||||||
Speed of drawing slide | Descent | mm/s | 150 | >250 | 250 | >270 | 200/300 | 350 | 350 | |||||||||
Pressing | mm/s | 10 | 12-30 | 12-25 | 10-30 | 11-20/12-30 | 20-40 | 15-33 | ||||||||||
Return | mm/s | 90 | 200 | 120 | 250 | 110/250 | 330 | 330 | ||||||||||
Speed of drawing slide | Descent | mm/s | 50 | >250 | 250 | >270 | 300 | 350 | 350 | |||||||||
Pressing | mm/s | 22 | 12-40 | 16-40 | 15-40 | 15-32 | 40 | 37 | ||||||||||
Return | mm/s | 35 | 200 | 150 | 250 | 250 | 330 | 330 | ||||||||||
Overall dimensions | L-R | mm | 4070 | 5400 | 5800 | 6200 | 6800/6500 | 6400 | ||||||||||
F-B | mm | 1648 | 3600 | 3800 | 4000 | 4860/5100 | 3500 | |||||||||||
Height | mm | overground 5300 underground2100 | 9300 | 7365 | 10375 | 6910/8200 | overground8813 underground4200 | overground9100 underground4400 | ||||||||||
Total power of the motor | KW | 48 | 110 | 133.7 | 155 | 108/180 | 320 | 330 | ||||||||||
Remarks | Stretching the slider cutting | Stretching the slider cutting | Stretching the slider cutting |
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.
Double Action Hydraulic Drawing Press
Y28-400/630
Characteristics:
- Straight-side structure with double slide, the slide with 8-flod guide way features
- Double slide can mechanical lock for single action
- Various way of rolling bolster: Front, lateral, T-travel type
- Full digital control of pressure parameters, pressure closed loop control
- Blank holder slide pressure subsection control
- Mould parameter storage and the failure diagnosis
- Full arrange of safety device and safety control system
- High efficiency of cooling device, suitable for continuous production
- No-pressure mould alignment, convenient for aligning mould
Options
- Proportional regulation for slide speed and cushion force
- Cushion pressure subsection control
- Light curtain safety device
- Oil heating/cooling unit
- Die protection unit
- Displacement sensor
- Industry touching screen monitor
- Upper ejecting device (hydraulic or mechanical type)
- Floating guide-way and rolling bracker for die exchange
- Working area lighting
- Power socket
- Non-recycling lubrication system controlled by computer
- Quick die clamping device
Name | Unit | Y28-25 | Y28-80/120 | Y28-100/180 | Y28-150/200 | Y28-100/350 | Y28-200/315 | Y28-250/400 | ||||||||||
Nominal force | KN | 250 | 1200 | 1800 | 2000 | 3500 | 3150 | 4000 | ||||||||||
Drawing force | KN | 800 | 1000 | 1500 | 1000 | 2500 | ||||||||||||
Blank-holding | KN | 800 | 500 | 2500 | 1000 | 1500 | ||||||||||||
Cushion /ejector force | KN | 400 | 315 | 500 | 630 | 630 | 1000 | |||||||||||
Knockout force | KN | 50 | 315 | |||||||||||||||
Stroke of drawing slide | mm | 220 | 410 | 710 | 570 | 750 | 800 | 800 | ||||||||||
Stroke of blank hold slide | mm | 350 | 600 | 350 | 350 | |||||||||||||
Cushion/ejector Stroke | mm | 1801 | 250 | 300 | 300 | 300 | ||||||||||||
Drawing sliden area | L-R | mm | 400 | 500 | 630 | 790 | 1200 | 1340 | ||||||||||
F-B | mm | 420 | 560 | 630 | 920 | 1200 | 540 | |||||||||||
Blank holder slide area | L-R | mm | 380 | 1200 | 800 | 1400 | ||||||||||||
F-B | mm | 380 | 1200 | 600 | 600 | |||||||||||||
Cushion area | L-R | mm | 510 | | ||||||||||||||
F-B | mm | 450 | ||||||||||||||||
Table area | L-R | mm | 640 | 500 | 630 | 790 | 1200 | 1200 | 1200 | |||||||||
F-B | mm | 420 | 600 | 630 | 920 | 1200 | 1200 | 1200 | ||||||||||
Daylight of drawing slide | mm | 660 | 1460 | 870 | 1600 | 1500 | 1500 | |||||||||||
Daylight of blank holder slide | mm | |||||||||||||||||
Speed of drawing slide | Descent | mm/s | 100 | 800 | ≥280 | 160 | 52 | ≥100 | ≥100 | |||||||||
Pressing | mm/s | 20 | 40-10 | 14-25 | 5-17 | 10 | 10 | |||||||||||
Return | mm/s | 50 | 120 | 130/200 | 180 | 100 | 50 (slow)100(fast) | siow50/fast100 | ||||||||||
Speed of drawing slide | Descent | mm/s | 100 | ≥100 | ≥100 | |||||||||||||
Pressing | mm/s | 50 | 10 | 10 | ||||||||||||||
Return | mm/s | 50 (slow)100(fast) | slow50/fast100 | |||||||||||||||
Overall dimensions | L-R | mm | 1860 | 2040 | 2300 | 2310 | 4400 | 4150 | 4950 | |||||||||
F-B | mm | 750 | 720 | 900 | 950 | 2500 | 1300 | 1500 | ||||||||||
Height | mm | 1650 | 2860 | 4250 | overground 4242 underground 1100 | 4850 | overground 5290 underground 800 | |||||||||||
Total power of the motor | KW | 4 | 15 | 22 | 22 | 24 | 44 | 44 |
Name | Unit | Y28-200/500 | Y28-400/630 | Y28-500/800 | Y28-630/1030 | Y28-800/1300(A) | Y28-1200/2000 | Y28-1600/2400 | ||||||||||
Nominal force | KN | 5000 | 6300 | 8000 | 10300 | 13000 | 20000 | 24000 | ||||||||||
Drawing force | KN | 4000 | 5000 | 6300 | 8000 | 12000 | 16000 | |||||||||||
Blank-holding | KN | 2000 | 2300 | 3000 | 4000 | 5000 | 8000 | 8000 | ||||||||||
cushion /ejector force | KN | 1000 | 1000 | 1600 | 2500 | 2500 | 5000 | 5000 | ||||||||||
Knockout force | KN | 500 | 200= 20*2*5 | |||||||||||||||
Stroke of drawing slide | mm | 900 | 1100 | 1300 | 1300 | 1400/1300 | 1500 | 1500 | ||||||||||
Stroke of blank hold slide | mm | 500 | 1000 | 1200 | 1200 | 1400/1200 | 1200 | 1200 | ||||||||||
Cushion/ejector Stroke | mm | 350 | 300 | 300 | 350 | 650/350 | 400 | 400 | ||||||||||
Drawing sliden area | L-R | mm | 1200 | 1600 | 2200 | 2500 | 2700 | 3800 | 2800 | |||||||||
F-B | mm | 1400 | 1000 | 1700 | 1500 | 1600 | 1900 | 1600 | ||||||||||
Blank holder slide area | L-R | mm | 450 | 2600 | 3200 | 3200 | 2500/2400 | 4500 | 3500 | |||||||||
F-B | mm | 1800 | 2400 | 2200 | 2200 | 2500 | 2200 | |||||||||||
Cushion area | L-R | mm | 2150 | 2000 | | 1500/2500 | 3600 | 2365 | ||||||||||
F-B | mm | 1250 | 1500 | 1420 | 1500/1500 | 1850 | 1450 | |||||||||||
Table area | L-R | mm | 1200 | 2600 | 3200 | 3200 | 2500/4000 | 4500 | 3500 | |||||||||
F-B | mm | 1400 | 1800 | 2400 | 2200 | 2200 | 2500 | 2200 | ||||||||||
Daylight of drawing slide | mm | 1500 | 1800 | 1800 | 2200 | 2300/2000 | 2100 | 2200 | ||||||||||
Daylight of blank holder slide | mm | 1700 | 1800 | 2200 | 2300/2000 | 1800 | 1900 | |||||||||||
Speed of drawing slide | Descent | mm/s | 150 | >250 | 250 | >270 | 200/300 | 350 | 350 | |||||||||
Pressing | mm/s | 10 | 12-30 | 12-25 | 10-30 | 11-20/12-30 | 20-40 | 15-33 | ||||||||||
Return | mm/s | 90 | 200 | 120 | 250 | 110/250 | 330 | 330 | ||||||||||
Speed of drawing slide | Descent | mm/s | 50 | >250 | 250 | >270 | 300 | 350 | 350 | |||||||||
Pressing | mm/s | 22 | 12-40 | 16-40 | 15-40 | 15-32 | 40 | 37 | ||||||||||
Return | mm/s | 35 | 200 | 150 | 250 | 250 | 330 | 330 | ||||||||||
Overall dimensions | L-R | mm | 4070 | 5400 | 5800 | 6200 | 6800/6500 | 6400 | ||||||||||
F-B | mm | 1648 | 3600 | 3800 | 4000 | 4860/5100 | 3500 | |||||||||||
Height | mm | overground 5300 underground2100 | 9300 | 7365 | 10375 | 6910/8200 | overground8813 underground4200 | overground9100 underground4400 | ||||||||||
Total power of the motor | KW | 48 | 110 | 133.7 | 155 | 108/180 | 320 | 330 | ||||||||||
Remarks | Stretching the slider cutting | Stretching the slider cutting | Stretching the slider cutting |
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.