Four Column Hydraulic Press for Forging (Y32-100)
-Computer optimized design, 3-beam and 4-column structure with high performance cost ratio
-Cartridge valve integrated unit equipped in hydraulic control system with high reliability durability
oil leakage is avoided by means of proper piping and minimum hydraulic impact design
-Independent electrical control system is adopted in the press adjustment or two-hand/single cycle
operation mode at operator's choice
-Preset stroke forming process or preset pressure forming process can be selected on control panel;
pressure holding period can be preset according to requirements
-Stroke and pressure can be adjusted within specificed scope.
-cutting dampening system
-proportional regulation for slide speed
-Light curtain safety device
-Oil heating/cooling unit
-Die protection unit
-Die exchange cart
-Industrial touting screen monitor
-Upper ejector (hydraulic or mechanical type)
-Floating guide-way and rolling bracket for die exchange
-Working area lighting
-Hydraulic driving system upon upper platform
-Quick die clamping device
-Slide upper locking device
Main technical parameters
|5||Stroke of knock-out cylinder||mm||200||200||200||250||300||300||350|
|6||Max.distance from bottom plane of slide to working table||mm||750||880||900||1000||1250||1250||1500|
|7||Speed of slide||Descent||mm/s||180||120||100||100||100||100||100|
|8||Effective area of working table||L-R||mm||580||720||1000||1000||1260||1240||1400|
|Height above floor||3100||2950||3450||3500||4295||4500||4995|
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.