 |
| Quantity: | |
|---|---|
Y32-200
TSD
Features:
Mechanical system
Three beams-four columns & Single oil cylinder structure
Fully welding machine frame with stress relief
Four guiding columns and filling lubricating
Standard or customized T slotting on table
Cylinder body & piston made of 45# steel forging part
Hard chromed and polished piston and four guide columns with high precision and bearing unbalance loading
Hydraulic system
Integrated two way cartridge valve with large flowing capacity and small flow resistance
Double circuit safety valve at the lower chamber of oil cylinder to prevent from overloading and accidental lower running
Flexible joint connection for shake-proof and leak-proof capacity
Liquid level indicator in oil tank
Filling fluid case designed on the upper place of upper cross beam
Electrical system
Inching/manual/semi automatic(single cycle) three working modes.
Constant pressure forming or setting stroke forming for choice.
Stroke communicating device can adjust stroke within range at will.
Emergency stop and Emergency returning buttons
Safer bimanualness
Protecting switch of stroke limit position 
Main technical parameters
| No. | Name | Unit | Parameter | |
| 1 | Nominal pressure | kN | 2000 | |
| 2 | Max.working pressure | MPa | 25 | |
| 3 | Max. opening height | Mm | 1120 | |
| 4 | Max.stroke of sliding block | Mm | 710 | |
| 5 | Effective size of working table (left-right x front-back) | mm | 900x900 | |
| 6 | Slide block speed | Empty approaching | mm/s | 80 |
| Working | mm/s | 5-12 | ||
| Returning | mm/s | 70 | ||
| 7 | Knock-out force | kN | 400 | |
| 8 | Height from table to floor | mm | 550 | |
| 9 | Total power | kW | 15 | |
Main configurations:
Oil cylinder- TSD,China
High pressure plunger pump-Qidong,China
Integrated valve group-Taifeng,Shandong,China
Button-Schneider
Breaker, AC contactor, Intermediate relay, proximity switch-Schnider or CHINT
Spare parts:
O seal rings, one set
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost. 
Features:
Mechanical system
Three beams-four columns & Single oil cylinder structure
Fully welding machine frame with stress relief
Four guiding columns and filling lubricating
Standard or customized T slotting on table
Cylinder body & piston made of 45# steel forging part
Hard chromed and polished piston and four guide columns with high precision and bearing unbalance loading
Hydraulic system
Integrated two way cartridge valve with large flowing capacity and small flow resistance
Double circuit safety valve at the lower chamber of oil cylinder to prevent from overloading and accidental lower running
Flexible joint connection for shake-proof and leak-proof capacity
Liquid level indicator in oil tank
Filling fluid case designed on the upper place of upper cross beam
Electrical system
Inching/manual/semi automatic(single cycle) three working modes.
Constant pressure forming or setting stroke forming for choice.
Stroke communicating device can adjust stroke within range at will.
Emergency stop and Emergency returning buttons
Safer bimanualness
Protecting switch of stroke limit position
Main technical parameters
| No. | Name | Unit | Parameter | |
| 1 | Nominal pressure | kN | 2000 | |
| 2 | Max.working pressure | MPa | 25 | |
| 3 | Max. opening height | Mm | 1120 | |
| 4 | Max.stroke of sliding block | Mm | 710 | |
| 5 | Effective size of working table (left-right x front-back) | mm | 900x900 | |
| 6 | Slide block speed | Empty approaching | mm/s | 80 |
| Working | mm/s | 5-12 | ||
| Returning | mm/s | 70 | ||
| 7 | Knock-out force | kN | 400 | |
| 8 | Height from table to floor | mm | 550 | |
| 9 | Total power | kW | 15 | |
Main configurations:
Oil cylinder- TSD,China
High pressure plunger pump-Qidong,China
Integrated valve group-Taifeng,Shandong,China
Button-Schneider
Breaker, AC contactor, Intermediate relay, proximity switch-Schnider or CHINT
Spare parts:
O seal rings, one set
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.
