content is empty!
CDY40/30
TSD
CDY Electric hydraulic press/single column machine
model:CDY40/30
Main technical data
No. | Name | Unit | Value | |
1 | Nominal pressure | kN | 392 | |
2 | Working pressure of fluid | Mpa | 25.5 | |
3 | Ram stroke | mm | 300 | |
4 | Ram speed | Approaching | mm/s | 16.2 |
Working | mm/s | 3.6 | ||
Returning | mm/s | 33 | ||
5 | Size of working table | Front-back | mm | 480 |
Left-right | mm | 400 | ||
6 | Motor power | kW | 2.2 |
Products Performance:
1. It adopts a steel frame structure as a whole and a mobile mrotective nets.Grating protection is optional.
2.The good quality of the products is based on exquisite manufacturing process and durable parts and components.
3.Its double-action cylinder,which is the original component sound hydraulic systems can stand wear and tear.
4.It is equipped with a soft starter.a two-hand-controlled footswitch and a manual stroke controller to controll upward and downward movement of the piston rod,which is very safe and convenient.
5.Equipped with T-slot for both upper and lower plate to install kinds of moulds.
6.Suitable for mold forging,stretching in industrial manufacturing.
7.Can choose pillar or slideway type according to different accuracy requirements.
CDY Electric hydraulic press/single column machine
model:CDY40/30
Main technical data
No. | Name | Unit | Value | |
1 | Nominal pressure | kN | 392 | |
2 | Working pressure of fluid | Mpa | 25.5 | |
3 | Ram stroke | mm | 300 | |
4 | Ram speed | Approaching | mm/s | 16.2 |
Working | mm/s | 3.6 | ||
Returning | mm/s | 33 | ||
5 | Size of working table | Front-back | mm | 480 |
Left-right | mm | 400 | ||
6 | Motor power | kW | 2.2 |
Products Performance:
1. It adopts a steel frame structure as a whole and a mobile mrotective nets.Grating protection is optional.
2.The good quality of the products is based on exquisite manufacturing process and durable parts and components.
3.Its double-action cylinder,which is the original component sound hydraulic systems can stand wear and tear.
4.It is equipped with a soft starter.a two-hand-controlled footswitch and a manual stroke controller to controll upward and downward movement of the piston rod,which is very safe and convenient.
5.Equipped with T-slot for both upper and lower plate to install kinds of moulds.
6.Suitable for mold forging,stretching in industrial manufacturing.
7.Can choose pillar or slideway type according to different accuracy requirements.