content is empty!
4000t Hydrostatic Tester
Summary
The production mill is for Ø508-1422mm of LSAW pipe mill with 100,000t/a
The hydrostatic tester adopts the most advanced technological process and technique, which is used to inspect the welding quality, relief the forming stress. The quality, production cost and every consuming index as well as labour efficiency can meet the requirements of technological process.
Technical parameter of machine
No. | Item | Specifications | Remarks |
1 | Outside diameter | φ508~φ1422 mm | |
2 | Length | 8~12.2 m | |
3 | Testing pressure | 3~25MPa | |
4 | Pressure keeping time | 5~30s | |
5 | Seal type | End face seal | 25Mpa, 25Mpa below |
6 | Testing medium: | Water | |
7 | Operating mode | , Manual, automatic | |
8 | Max. loading capacity of hydrostatic tester | 4000 T | |
9 | Taking Time: average | 10/10pcs/h | 30 Holding pressure 30s |
10 | Precision of control | ≤0.4MPa |
4000t Hydrostatic Tester
Summary
The production mill is for Ø508-1422mm of LSAW pipe mill with 100,000t/a
The hydrostatic tester adopts the most advanced technological process and technique, which is used to inspect the welding quality, relief the forming stress. The quality, production cost and every consuming index as well as labour efficiency can meet the requirements of technological process.
Technical parameter of machine
No. | Item | Specifications | Remarks |
1 | Outside diameter | φ508~φ1422 mm | |
2 | Length | 8~12.2 m | |
3 | Testing pressure | 3~25MPa | |
4 | Pressure keeping time | 5~30s | |
5 | Seal type | End face seal | 25Mpa, 25Mpa below |
6 | Testing medium: | Water | |
7 | Operating mode | , Manual, automatic | |
8 | Max. loading capacity of hydrostatic tester | 4000 T | |
9 | Taking Time: average | 10/10pcs/h | 30 Holding pressure 30s |
10 | Precision of control | ≤0.4MPa |