Plate Crimping Press
Plate length: 8000-12000mm
Plate thickness: 6--22mm
Steel grade: X70 (API 5L)
Production capacity: 7 pieces/ hour
- Used in LSAW production line
- Two crimping presses arranged oppositely
- Prebend plate edges to ensure the roundness of pipe and reduce the overlong straight edge.
- Step feeding
- Small flanging force and wider range for curvature radius of flange plate
- CNC control
- Easy to operate
|Single-side press power of die||KN||3000|
|Single-side packing force of die||KN||290×2|
|Working pressure of suppression cylinder, pressing cylinder||MPa||max 26|
|Lifting strokes of low-die-beam||mm||max 200|
|Lifting strokes of pressing-beam||mm||Max.70|
|The distance between upper bus-bar of roller and lower limb of upper||mm||45|
|Useful length of die||mm||800|
|Changeover portion of low die||mm||Entrance 600|
|Crimp stepping length of steel plate||mm||700|
|Width range of pre-bend both sides steel plate||mm||1200~2600|
|Moving distance of left-right frame||mm||About 750|
|Driving Motor power of left-right frame moving||kW||5.5||Total 1 set of left, right.|
|Stroke speed of left-right frame||mm/min||480||Opposite moving synchronously.|
|Moving distance of left-right dies||mm||250|
|Moving speed of left-right dies||mm/min||260|
|Total installating power of machine||kW||183||Including main and auxiliary machine.|
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality management system in our company and on our products.All products before ex-works have been strictly tested and are in conformity with technical agreement and standard.
2. Warranty is one year since final acceptance date of heavy duty machinery. Longer warranty could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical) to guide the installation, testing and training the operators after the machine reaches the factory of user. But the local accommodation in the User's country will be arranged by the Buyer. The above charges do not be included in the offer. This clauses will be shown in the contract.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician service at lowest cost.