 |
| Quantity: | |
|---|---|
W11-4*2500
TSD
Section bending machine
model W11-4X2500
Features:
- 3 Roll mechanical & symmetrical type
- Section bending designing
- Solid top and bottom rolls with HRC45 hardness
- Top roll can be vertically lifted up and down
- Powered bottom rolls
- Heavy loading bearing installed at roller ends
- Balanced device for top roll tail to remove workpiece out conveniently
- Welded baseboard and machine frame with high rigidity
- Qualified electrical components
Hightlights:
Bending for 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" steel tube are available
Max.angle steel ∠40*∠40*4mm bending is available
Max.30mm round bar bending is available
Option:
Cone device
Main specifications:
| No | Name | Unit | Parameter |
| 1 | Max.rolling thickness | mm | 4mm |
| 2 | Max. rolling length | mm | 2500 |
| 3 | Yield limit of plate | MPa | 245 |
| 4 | Rolling speed | m/min | 4 |
| 5 | Diameter of top roller | mm | 170 |
| 6 | Diameter of bottom roller | mm | 150 |
| 7 | Center distance of two bottom rollers | mm | 220 |
| 8 | Min.rolling diameter at Max. rolling thickness and Max. rolling length | mm | 285 |
| 9 | Main motor power | kW | 4 |
| 10 | Auxiliary motor power | kW | 1.5 |
| 11 | Overall dimensions(L×W×H) | mm | 4200*850*1250 |
| 12 | Weight | kg | 3200 |
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this
quality management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer
warranty could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-
sale-service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the
former, which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and
the long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply
full failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.
Section bending machine
model W11-4X2500
Features:
- 3 Roll mechanical & symmetrical type
- Section bending designing
- Solid top and bottom rolls with HRC45 hardness
- Top roll can be vertically lifted up and down
- Powered bottom rolls
- Heavy loading bearing installed at roller ends
- Balanced device for top roll tail to remove workpiece out conveniently
- Welded baseboard and machine frame with high rigidity
- Qualified electrical components
Hightlights:
Bending for 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" steel tube are available
Max.angle steel ∠40*∠40*4mm bending is available
Max.30mm round bar bending is available
Option:
Cone device
Main specifications:
| No | Name | Unit | Parameter |
| 1 | Max.rolling thickness | mm | 4mm |
| 2 | Max. rolling length | mm | 2500 |
| 3 | Yield limit of plate | MPa | 245 |
| 4 | Rolling speed | m/min | 4 |
| 5 | Diameter of top roller | mm | 170 |
| 6 | Diameter of bottom roller | mm | 150 |
| 7 | Center distance of two bottom rollers | mm | 220 |
| 8 | Min.rolling diameter at Max. rolling thickness and Max. rolling length | mm | 285 |
| 9 | Main motor power | kW | 4 |
| 10 | Auxiliary motor power | kW | 1.5 |
| 11 | Overall dimensions(L×W×H) | mm | 4200*850*1250 |
| 12 | Weight | kg | 3200 |
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this
quality management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer
warranty could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-
sale-service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the
former, which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and
the long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply
full failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.
