Bending Standard Hydraulic Press Brake Tooling (300--2500kN)
Home » Products » Press Brake » Press Brake Tooling » Bending Standard Hydraulic Press Brake Tooling (300--2500kN)

Related News

content is empty!

Share to:

Bending Standard Hydraulic Press Brake Tooling (300--2500kN)

Quantity:

Bending Standard Hydraulic Press Brake Tooling
300--2500kN

1. Std. Material of top tool: German DIN. Standard 45WCrV7(1.2542) (VDEh);
   Std. Material of bottom tool: German DIN. Standard C105W1(1.1545) (VDEh)

2. HRC 48~52 degree for top tool; HRC 45-48 for bottom tool
3. Connecting mode between top tool and adapter: as customer's requirements
4. Less oxidation and decarbonization, and hardness uniform.
5. Tools heated by special atmosphere oven, and bulk heat treatment.
6. Segmented and Solid tools
7. Tool straightness: 0.01mm/m; Less than 0.05mm on full length
8. Working surface roughness of tool: Less than 3.2
9. No crack, notch and interlayer
10. Joint width of any two segmented top tool or bottom tool: Less than 0.05mm
11. Straightness of combined segmented tools: Less than 0.08mm on full length
12. Parallelism of tool on full length: Less than 0.06mm
13. High precision and high intensity
14. Easy setting and long life
15. Fit for any press brake machines
16. Strict quality management system
17. Small orders accepted.
18. OEM and ODM
19. Standard: ISO9001: 2000; ISO14001: 1994; OHSAS18001: 1999

Punch and Die for Press Brake (300--2500kN)


Punch and Die for Press Brake (300--2500kN)

Punch and Die for Press Brake (300--2500kN)




For any enquiry on special top tools, please state:
Punch and Die for Press Brake (300--2500kN)
Max.nominal pressure
Max.length of working table
Max.width of working table
Max.open height or stroke

Max.steel grade or tensile strength of sheet
Max.thickness of sheet
If there is coated on sheet

Total height H
Dimensions of tongue A-B-C-D
Degrees on the nose F
Measure of flat on E or radius R
Whether the press-brake presses on P or P1
Length and segmented
Connecting type and sizes between top tool and ram
Punch and Die for Press Brake (300--2500kN)




For any enquiry on special bottom tool, please state:
Max.nominal pressure

Max.length of working table
Max.width of working table
Max.open height or stroke

Max.steel grade or tensile strength of sheet
Max.thickness of sheet
If there is coated on sheet
Punch and Die for Press Brake (300--2500kN)

Total height H1,H2 and H3

Dimensions A, B, C, D, E and radius R
Number and position of grooves
Width of grooves V
Degrees on grooves F

Length and segmented

After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
   management system in our company and on our products.
  All products before ex-works have been strictly tested and are in conformity with technical agreement and
  standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
   could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
   to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
   reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
  (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
   included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
   firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
   free to contact the Seller.  
   If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
   service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
   which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
   long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
   failure description, clear pictures and videos, if possible.
   Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
   B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
   service at lowest cost.
















Quality First, Customer First

TSD's R&D center is awarded as National R&D Center.We're pleased to get your Inquiry and we will come back to as soon as possible.
More 

Share It

Quick Links

Contact Us

Tel:+86-938-2621183
Mobile: +86-13830852097
Head officeNorth Weibin Road,Maiji
District,Tianshui City,Gansu Province 741020 P.R.China
E-mail:sales@tsdpressbrake.com

GET IN TOUCH
​Copyright © Tianshui Metalforming Machine Tool (Group) Co., Ltd.    Sitemap
Technology by leadong