Radius Tooling for Press Brake (R=120mm)

Radius tooling for press brake





Features:
1. Material: W2-91/2(ASTM); BW1B(BS); 1203Y290(NF); SK4(JIS);
2. HRC: 45~55 Centigrade degree
3. Less oxidation and decarbonization, and hardness uniform.
4. Tools heated by special atmosphere oven, and bulk heat treatment.
5. Segmented and Solid tools
6. Tool straightness: 0.01mm/m; Less than 0.05mm on full length
7. Working surface roughness of tool: Less than 3.2
8. No crack, notch and interlayer
9. Joint width of any two segmented upper tool or lower tool: Less than 0.05mm
10. Straightness of combined segmented tools: Less than 0.08mm on full length
11. Parallelism of tool on full length: Less than 0.06mm
12. High precision and high intensity
13. Easy setting and long life
14. Fit for any press brake machines
15.44 years professional manufacture experience in this line
16. Strict quality management system
17. Small orders accepted.
18. OEM and ODM
19. Standard: ISO9001: 2000; ISO14001: 1994; OHSAS18001: 1999