Hydraulic Press Brake Upper Tooling (300-32000KN)

Hydraulic Press Brake Upper Tooling

Features:
1. Material: W2-91/2(ASTM); BW1B(BS); 1203Y290(NF); SK4(JIS);
2. HRC: 45~55 Centigrade degree
3. Less oxidation and decarbonization, and hardness uniform.
4. Tools heated by special atmosphere oven, and bulk heat treatment.
5. Segmented and Solid tools
6. Tool straightness: 0.01mm/m; Less than 0.05mm on full length
7. Working surface roughness of tool: Less than 3.2
8. No crack, notch and interlayer
9. Joint width of any two segmented upper tool or lower tool: Less than 0.05mm
10. Straightness of combined segmented tools: Less than 0.08mm on full length
11. Parallelism of tool on full length: Less than 0.06mm
12. High precision and high intensity
13. Easy setting and long life
14. Fit for any press brake machines
15.50 years professional manufacture experience in this line
16. Strict quality management system
17. Small orders accepted.
18. OEM and ODM
19. Standard: ISO9001: 2000; ISO14001: 1994; OHSAS18001: 1999



For any enquiry on special top tools, please state:

Max.nominal pressure
Max.length of working table
Max.width of working table
Max.open height or stroke
Max.steel grade or tensile strength of sheet
Max.thickness of sheet
If there is coated on sheet

Total height H
Dimensions of tongue A-B-C-D
Degrees on the nose F
Measure of flat on E or radius R
Whether the press-brake presses on P or P1
Length and segmented
Connecting type and sizes between top tool and ram




For any enquiry on special bottom tool, please state:
Max.nominal pressure
Max.length of working table
Max.width of working table
Max.open height or stroke
Max.steel grade or tensile strength of sheet
Max.thickness of sheet
If there is coated on sheet


Total height H1,H2 and H3
Dimensions A, B, C, D, E and radius R
Number and position of grooves
Width of grooves V
Degrees on grooves F
Length and segmented

Pressure table