5000t Automatic Gantry type hydraulic press (Y45-500/2500X5000)
Home » Products » Hydraulic Press » Gantry type hydraulic press » 5000t Automatic Gantry type hydraulic press (Y45-500/2500X5000)

Related News

content is empty!

Share to:

5000t Automatic Gantry type hydraulic press (Y45-500/2500X5000)

  • Y45-500/2500X5000
  • TSD

Shipbuilding Press Bending Machine

- X-Y-Z axis movement motorised
- For bending thick steel plate
Shipbuilding Press Bending Machine (Y45-500/2500X5000)
- Customerized bending tools
Shipbuilding Press Bending Machine (Y45-500/2500X5000)
- Inch, single and micro-inch operating
- Pressure monometer
- Easy to operate
- Stop any positon you want
- Two Individual hydraulic systems separately for main oil cylinder and knock-out cylinder
- Fast down, slow down, pressing, pressure-holding, unloading, fast returning functions for main
 oil cylinder

- Overloading protection for hydraulic system
- Control panel on gantry frame or pendant arm

Shipbuilding Press Bending Machine (Y45-500/2500X5000)

- Portable operating box

Main Specifications

1Nominal pressure5000KN
2Working table width2500mm
3Working table length5000mm
4Max.stroke of pressing head in lengthwise2500mm
5Max.stroke of pressing head in crosswise5000mm
6Max.stroke of pressing head in height direction800mm
7Distance between button face and working table1200mm
8Main pressing head fast down speed80mm/s
9Main pressing head slow down speed5mm/s
10Max. Returning speed of main pressing head70mm/s
11Cross beam fast moving speed≥175mm/s
12Small carriage moving speed≥120mm/s
13Main motor power37kW

Main configurations:
PLC: Mitsubishi, Japan or Siemens, Germany
Electrical components: Schneider
Hydraulic component: Huade, Beijing, China (same connector as Rexroth)
Main oil pump: Nachi,Japan 
Seal ring of main oil cylinder: NOK,Japan

1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
   management system in our company and on our products.
  All products before ex-works have been strictly tested and are in conformity with technical agreement and
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
   could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
   to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
   reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
  (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
   included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
   firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
   free to contact the Seller.  
   If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
   which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
   long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
   failure description, clear pictures and videos, if possible.
   Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
   B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
   service at lowest cost.

Quality First, Customer First

TSD's R&D center is awarded as National R&D Center.We're pleased to get your Inquiry and we will come back to as soon as possible.

Share It

Quick Links

Contact Us

Mobile: +86-13830852097
Head officeNorth Weibin Road,Maiji
District,Tianshui City,Gansu Province 741020 P.R.China

​Copyright © Tianshui Metalforming Machine Tool (Group) Co., Ltd.    Sitemap
Technology by leadong