Views: 1 Author: Site Editor Publish Time: 2020-11-24 Origin: Site
Light pole can be seen everywhere in our life, and its production process is very complicated, this article will take you to understand process flow of light pole production line.
The following knowledge points are listed below:
Easy roll plate opening light pole production line
Steel cut diagonally Light pole production line
Dual sheet metal bending machine light pole production line
Automatic joint welding light pole production line
Mechanical sewing machine light pole production line
Semi-automatic welding light pole production line
Pipe straightening machine light pole production line
Pipe bending machine light pole production line
Light pole production line is a relatively complex and professional process, which requires a variety of mechanical steps to complete. We will learn about the process flow of Light pole production line from the following points:
The system consists of six parts: uncoiler and side guide device, uncoiler, shearing device, code material arrangement and electrical system.It is especially suitable for the opening and leveling of the equipment such as street lamp pole, flag pole and so on.
It is suitable for longitudinal shearing processing of long type shears. The length of shears can be adjusted arbitrarily.With higher labor productivity, the required cutting plate is pressed on the walking device through hydraulic steel, the disc knife is rotated under the cutting, plate walking device runs and the cutting plate, when pressing, the plate according to the required size oblique, you can cut the taper plate.It is especially suitable for the cutting of lamp pole and flag pole.
The device has two bending unit, two-stage linkage, synchronization, a variety of random light pole mould, can be applied to production of street lamp light pole, flagpole, light, etc., used in the production of conical light pole, fitted with conical die, multiple blade bending, the last knife middle bending, forming a conical light pole.Then use the lamp pole round machine to pull out the lamp pole;Need to produce more. When side shape lamp pole, mark pole and tall pole lamp, install polygonal special mold, many knives bend, finally bend in the middle of a knife, a multi deformation lamp pole is formed, and then pull out the lamp pole with the rod rolling machine.
The device by the host header, traction bed, bar material of exhaust hood, traction bed by sports car traction steel steel collet clamp head car movement, push the steel bar from the little head to big head movement, the host clip first six claw clamping under uniform motion, steel rod big end under the hijacking of loose steel bar trolley, the guide wheel automatic butt on the nose, steel rod joint at the same time, start rolling welding welding machine, this equipment adopts automatic welding, automatic flux recovery, uniform weld, continuous and beautiful, strong penetration, a joint welding forming, welding of high efficiency and speed of 23 m/min, is 3 times of gas shielded welding, welding costs less than gas,At present, it is the equipment with the fastest welding speed, good effect and lowest price in the domestic lamp pole industry.This equipment mainly welding street lamp pole and flag pole, pole body is relatively large sign pole and high pole lamp generally do not use this equipment.The bar body is larger than the sign bar and high bar lights generally do not use this equipment.
This machine is suitable for high bar lamp and sign bar after bending joint special equipment.The machine is driven by the turbine and worm to close the joint, can be combined operation or single operation, with manual welding, high efficiency, after the spot welding to semi-automatic welding.
This machine welding does not shine, welding speed is fast, suitable for all kinds of rod body, manual adjustment is convenient and rapid, uniform welding seam, continuous beauty, strong penetration, a molding, speed 1-3 meters/minute, is three times of the gas welding, is the mechanical joint machine after the joint mark bar, and high bar lamp welding equipment.
The structure of the device is simple and compact, convenient, specific operation, the steel rod can be manually placed on the die, there is a person to hold, hand, button point dynamic pressure.The straightness of the steel rod is controlled by manual visual inspection with high efficiency. The equipment can straighten the lamp pole of any shape, the sign pole, the flag pole and the high pole lamp, the head is round.
According to the design needs, the head of some street lamp pole needs to be bent, that is, from the bending arm lamp pole, composed of the main board and bending die.With two sets of molds, the direct mold in the reducer cleaning, will be pressed on the circular mold steel pipe along the circular mold bending, simple operation, no need for heating and filling, can be directly conical lamp pole upper bending, economic benefits is the lamp pole manufacturers must equipment.
A street lamp pole is basically formed through the above light pole production line, then the lamp door is cut with a plasma cutting machine and welded to a circular or square flange according to the requirements of the drawing.Now, the construction of the city requires a high demand on the surface of the light pole, which can be beautiful only after polishing. Our company specializes in the production of various light poles. If you want to know more about the light pole production line, Press Brake，Shearing Machine please contact us.
