content is empty!
W11F-2X1500
TSD
Plate Rolling Machine with 3-Roll and Prebending
model W11F-2X1500
Features:
- 3 Roll asymmetrical type
- Solid top and bottom rolls with HRC45 hardness
- Powered top roll and bottom rolls
- Lifting vertically bottom rolls
- Prebending of plate ends is available but U-turn of plate is needed.
- Heavy loading bearing installed at roller ends
- Balanced device for top roll tail to remove workpiece out conveniently
- Welded baseboard and machine frame with high rigidity
- Qualified electrical components
Main technical parameters:
Model | Max. rolling thickness (mm) | Max. rolling Width (mm) | Yield strength of Plate material (MPa) | Min. rolling diameter (mm) | Top roll diameter (mm) | Bottom roll diameter (mm) | Side roll diameter (mm) | Main motor power (kw) |
W11F-2× 1000 | 2 | 1000 | 245 | 250 | 120 | 120 | 120 | 2.2 |
W11F-2× 1200 | 2 | 1200 | 245 | 250 | 120 | 120 | 120 | 2.2 |
W11F-2× 1500 | 2 | 1500 | 245 | 250 | 130 | 130 | 130 | 2.2 |
W11F-2× 2000 | 2 | 2000 | 245 | 250 | 130 | 130 | 130 | 2.2 |
W11F-4× 1000 | 4 | 1000 | 245 | 300 | 140 | 140 | 140 | 3 |
W11F-4× 1200 | 4 | 1200 | 245 | 300 | 140 | 140 | 140 | 3 |
W11F-4× 2000 | 4 | 2000 | 245 | 350 | 150 | 150 | 150 | 3 |
W11F-6× 1000 | 6 | 1000 | 245 | 350 | 140 | 140 | 140 | 3 |
W11F-6× 1500 | 6 | 1500 | 245 | 400 | 150 | 150 | 150 | 4 |
W11F-6× 2000 | 6 | 2000 | 245 | 400 | 160 | 160 | 160 | 4 |
Plate Rolling Machine with 3-Roll and Prebending
model W11F-2X1500
Features:
- 3 Roll asymmetrical type
- Solid top and bottom rolls with HRC45 hardness
- Powered top roll and bottom rolls
- Lifting vertically bottom rolls
- Prebending of plate ends is available but U-turn of plate is needed.
- Heavy loading bearing installed at roller ends
- Balanced device for top roll tail to remove workpiece out conveniently
- Welded baseboard and machine frame with high rigidity
- Qualified electrical components
Main technical parameters:
Model | Max. rolling thickness (mm) | Max. rolling Width (mm) | Yield strength of Plate material (MPa) | Min. rolling diameter (mm) | Top roll diameter (mm) | Bottom roll diameter (mm) | Side roll diameter (mm) | Main motor power (kw) |
W11F-2× 1000 | 2 | 1000 | 245 | 250 | 120 | 120 | 120 | 2.2 |
W11F-2× 1200 | 2 | 1200 | 245 | 250 | 120 | 120 | 120 | 2.2 |
W11F-2× 1500 | 2 | 1500 | 245 | 250 | 130 | 130 | 130 | 2.2 |
W11F-2× 2000 | 2 | 2000 | 245 | 250 | 130 | 130 | 130 | 2.2 |
W11F-4× 1000 | 4 | 1000 | 245 | 300 | 140 | 140 | 140 | 3 |
W11F-4× 1200 | 4 | 1200 | 245 | 300 | 140 | 140 | 140 | 3 |
W11F-4× 2000 | 4 | 2000 | 245 | 350 | 150 | 150 | 150 | 3 |
W11F-6× 1000 | 6 | 1000 | 245 | 350 | 140 | 140 | 140 | 3 |
W11F-6× 1500 | 6 | 1500 | 245 | 400 | 150 | 150 | 150 | 4 |
W11F-6× 2000 | 6 | 2000 | 245 | 400 | 160 | 160 | 160 | 4 |