Views: 1 Author: Site Editor Publish Time: 2020-10-07 Origin: Site
C frame type hydraulic press plays a vital role in many fields. Today we will learn about the characteristics of C frame type hydraulic press
The following knowledge points are listed below:
Brief introduction to C frame type hydraulic press
Conduct characteristics of C frame type hydraulic press
Structure characteristics of C frame type hydraulic press
C frame type hydraulic press is also divided into 10 ton C hydraulic press, 40 ton C hydraulic press, 63 ton, 100 ton, 160 ton, 125 ton, 200 ton, 315 ton, 500 ton and so on.According to the use of different divided into: C type straightening machine, C type correction press hydraulic press, C type bearing press hydraulic press, auto parts C type hydraulic press.C frame type hydraulic press is a computer optimized vertical C structure with good rigidity.All parts of the machine are installed in the fuselage, neat and beautiful appearance.The hydraulic system adopts electromagnetic reversing valve, which is convenient for speed regulation.There are two operating modes: hand and foot.Machine stroke and excitation can be adjusted within the specified range.The hydraulic system is equipped with a pressure pre-release device, which can reduce the hydraulic impact.
(1) C frame type hydraulic press noise should not exceed 80 db when standby;
(2) Adopt the solid open structure with integral welding, which can make the fuselage keep enough rigidity and have the most convenient operation space;
(3) C frame type hydraulic press is controlled by a timer, a pressure switch, a position sensor, or the customer's own mold.
(4) The lifting height of the press mounted spindle can be adjusted by a timer or position sensor within any travel range;
(5) The decline and recovery speed of the spindle is uniform: 3tf is 90MM/S, 5tf is 75MM/S, and 10tf is 68MM/S.
(6) Pressure, stroke, holding time and closing height can be adjusted by the customer, which is convenient for operation;
(7) C frame type hydraulic press is a statistical built-in frame with clean, light and stable appearance.
(8) With automatic counting function, can also be installed with a force measuring display, can be customized according to customer requirements any non-standard equipment;
(9) C frame type hydraulic press is available for 63tf, 100tf, 160tf.
(10) This series of hydraulic press is powered by 1-15mpa liquid pressure, with external three-phase AC380V 50HZ or three-phase ac22060hz ac power supply, and the total power consumption is no more than 3.7kw.
(11) Break and semi-automatic control modes, which can be used to stop the press mounting die in any travel range manually, equipped with emergency recovery button, or equipped with photoelectric hand protection device.
(12) C frame type hydraulic press takes the liquid as the medium to transfer energy, the control is flexible, the operation speed is uniform and stable, compared with the pneumatic equipment, the speed and pressure can be adjusted and controlled, the output regulation range is large, the independence is strong, the performance is more stable, can greatly improve the product pressing quality.
① C-type fuselage design, fuselage overall casting, good rigidity.
② Equipped with liquid filling valve, the operation speed is fast.
③ Press the button and pedal two ways to start the cycle.
④ the use of PLC control, programming to control the action process and speed, accurate positioning, high precision.
⑤ Safety design, two-handed operation, with emergency stop button and up and down function.
⑥ Widely used in parts of the pressing, bending, punching, stamping, and shaft parts calibration and pressing.
⑦ Infrared protection device (optional).
If you need C frame type hydraulic press, please feel free to contact us.We not only provide you with satisfactory C frame type hydraulic press, pipe calibration press, guillotine shear machine but also provide intimate after-sales service.
