Small Electric-servo CNC Press Brake for Metal (WE67K-250/5000)

Technical Specifications

Standard configuration: 
- CNC system DA52 up,Delem,Holland/DNC880S,Cybelec, Switzerland/ESA S530,Italy
- Electrical-hydraulic proportional synchronous valve group: Hoerbiger/Bosch,Germany
- Main electrical components: Schneider
- Optical scale Givi, Italy      
- Gear pump with low noise: Nachi, Japan
- Main oil cylinder seal ring: NOK,Japan
- Ball screw and linear guide: ABBA, Taiwan
- Electrical cabinet wind cooling 

Options
-Throat depth
-Top and bottom tools
-Back gauge with R, Z axis
-Light curtain
-Oil cooler/warmer
-CE certificate

Production technological process
Steel plate to warehouse →physical & chemical inspection→ steel plate ball blasting (dustproof) processing → cutting through CNC flame cutting machine → cutting and processing to each welding junction plane → compound welding→ Air protecting welding → Stress relief by electrical furnace →processing through heavy-duty floor type boring and milling machine, heavy-duty gantry milling machine → Fabrication.  

Packing: Coating with anti-rust oil on working surface, with plastic film layer for whole machine. Packed in container or in bulk.

After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this
   quality management system in our company and on our products.
  All products before ex-works have been strictly tested and are in conformity with technical agreement and
  standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery.
   Longer warranty could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
   to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
   reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
  (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
   included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
   firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
   free to contact the Seller.  
   If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of
  after-sale-service.
  All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the
  former, which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date,
   and the long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User have to
   supply full failure description, clear pictures and videos, if possible.
   Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year
   since B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to
   repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
   service at lowest cost.