Views: 2 Author: Site Editor Publish Time: 2020-12-03 Origin: Site
The operation of the guillotine shear machine is very professional, so there are a number of precautions during and before the operation of the guillotine shear machine that this article will take you through precautions for use of the guillotine shear machine
The following knowledge points are listed below:
Instructions for the use of the guillotine shear machine
Usage of guillotine shear machine
Use of guillotine shear machine
The guillotine shear machine is a shear machine widely used in machining. It can shear steel plates of various thickness.Shears with shear thickness less than 6mm are mostly mechanical drives, while those with shear thickness greater than 6mm are hydraulic drives.Generally, single or continuous cutting of metal is carried out by using pedal or button control.
1. Instructions for the use of the guillotine shear machine
(1) Before operating the guillotine shear machine, you should wear tight protective clothing, with the cuffs fastened and the hem of the jacket not open. You should not wear, change clothes or put them around the operating guillotine shear machine to prevent the machine from being twisted.Must wear a safety helmet, braid should be put into the hat, do not wear skirts, slippers.
(2) The guillotine shear machine operator must be familiar with the main structure, performance and usage of the guillotine shear machine.
(3) The guillotine shear machine is applicable to all kinds of steel plates, copper plates, aluminum plates and plates of non-metallic materials whose shear material thickness is the rated value of the machine tool.
1) Adjust the clearance of the blade according to the thickness of the cut material.According to the width of the material to be cut to adjust the mold or fixture.The guillotine shear machine operates by performing 1-3 blank runs before performing shear work.
2) In case of abnormal operation of the guillotine shear machine during use, the power shall be cut off and the machine shall be stopped for inspection immediately.
3) When adjusting the guillotine shear machine, the power must be cut off. When moving the workpiece, pay attention to the safety of the hands.
4) All parts of the guillotine shear machine shall be lubricated on a regular basis. Lubricating oil shall be added once per shift by the operator and once every six months by the mechanic to the rolling bearing.
(1) Start guillotine shear machine for idling for several cycles to ensure that under normal conditions, the shear of sheet materials with different thickness can be tested from thin to thick.Ensure that the user is familiar with the guillotine shear machine performance.
(2) The clearance of different blades must be adjusted when the plate thickness is different.If the corresponding blade clearance is not adjusted, the blade durability will be affected.
(3) The guillotine shear machine opens the pressure gauge during the shearing process and observes the oil pressure value. The user must comply with this regulation. It is not allowed to increase the pressure for cutting over the specified material surface and cause damage to the machine.
(4) Sound balance during operation.Stop the machine if there is noise from the guillotine shear machine.
(5) During operation of the guillotine shear machine, the temperature of the oil tank shall be raised to less than 60 ° c, and the guillotine shear machine shall be shut down for rest when exceeded.
1) Before work, check whether the parts of the guillotine shear machine are normal, whether the electrical equipment is in good condition, and whether the lubrication system is smooth.Clear the table and its surrounding placed tools, measuring tools and other sundries and corner waste.
2) Do not operate the guillotine shear machine alone. Instead, 2-3 people should coordinate the feeding, control the dimensional accuracy and the picking, and ensure that 1 person has unified command.
3) Adjust the scissors clearance of the guillotine shear machine according to the specified shear plate thickness.Do not shear 2 kinds of different specifications and materials at the same time.Shall not be sheared.Shearing of the plate material requirements of the surface flat, do not allow the shear can not be pressed the narrower plate.
4) The belts, flywheels, gears and shafts of the guillotine shear machine must be protected.
5) The operator's feeding finger should be kept at least 200mm away from the scissors and away from the pressing device.Protective fences placed on the guillotine shear machine should not block the operator from seeing the cut area.After the operation of the waste products are angular, operators should be promptly removed, to avoid being stabbed, cut.
6) The flywheel, gear, shaft, belt and other moving parts of the guillotine shear machine shall be protected.
7) Put a fence to prevent the operator's hand from entering the scissors falling area.It is strictly prohibited to pick up the ground waste when working, so as not to be hurt by the falling workpiece.
8) Materials that cannot be cut and hardened shall not be cut beyond the working capacity of the guillotine shear machine.
I hope this article has helped you understand the guillotine shear machine. If you happen to need the guillotine shear machine, Swing Beam Shearing Machine， Corner Forming Machine please contact us.
