Hydraulic Guillotine Plate Shearing Machine (QC11Y-8X4000)
Home » Products » Shearing Machine » Guillotine Shear Machine » Hydraulic Guillotine Plate Shearing Machine (QC11Y-8X4000)

Related News

content is empty!

Share to:

Hydraulic Guillotine Plate Shearing Machine (QC11Y-8X4000)

  • QC11Y-8X4000
  • TSD
Hydraulic Guillotine Shear

- ASTM283M Gr.D steel to be used for fully welded construction with stress relief
- Knife beam consisted of knife body, double oil cylinders in series, 3 points roll guide rail and clearance adjusting device
- Adjustable cutting angle
- Rolling ball on front supporter and working table for conveniently feeding
- Motorized blade clearance adjustment with displayer
- Returning by nitrogen gas accumulator
- Hold-down clamped hydraulically
- Motorized back gauge
- 6CrW2Si blades
- Lighting alignment cutting device
- Hydraulic manifold valve block
- International standard electrical components
- Electrical cabinet wind cooling
- Movable foot pedestal with emergency stop button
Hydraulic Guillotine Shear/Shearing Machine/Metal Cutting Machine (QC11Y-8X4000)

Hydraulic Guillotine Shear/Shearing Machine/Metal Cutting Machine (QC11Y-8X4000)

Hydraulic Guillotine Shear/Shearing Machine/Metal Cutting Machine (QC11Y-8X4000)

Hydraulic Guillotine Shear/Shearing Machine/Metal Cutting Machine (QC11Y-8X4000)

Technical Specifications

Shear angle(°)0.5-2
Back gauge range(mm)800
Motor power(kw)15
Overall dim(L*W*H)(mm)4868*2387*2380

Standard configuration: 
- Chinese famous brand's main electrical components
Motor: Xi'an SIMO, http://www.simo.com.cn
Hydraulic system: Beijing Huade, China
- Seal rings of main cylinders: NOK, Japan
- 380 Volts/3 Phases/50Hz

Whole length blade
Cr12MoV/H13K material blade for stainless steel cutting
Pneumatic back supporter
Extended side arm

Packing: Coating with anti-rust oil on working surface, with plastic film layer for whole machine. Packed in             container 

1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
   management system in our company and on our products.
  All products before ex-works have been strictly tested and are in conformity with technical agreement and
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
   could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
   to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
   reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
  (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
   included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
   firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
   free to contact the Seller.  
   If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
   which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
   long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
   failure description, clear pictures and videos, if possible.
   Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
   B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
   service at lowest cost. 

Quality First, Customer First

TSD's R&D center is awarded as National R&D Center.We're pleased to get your Inquiry and we will come back to as soon as possible.

Share It

Quick Links

Contact Us

Mobile: +86-13830852097
Head officeNorth Weibin Road,Maiji
District,Tianshui City,Gansu Province 741020 P.R.China

​Copyright © Tianshui Metalforming Machine Tool (Group) Co., Ltd.    Sitemap
Technology by leadong