content is empty!
 |
loading
ZS-QD11K-16*9000
TSD
ZS-QD11K-16*9000
ZS-QD11K-16*9000
Machine main composition, structure, function and technical data
| Machine | Name | Data | Note |
| Auxiliary Sheet preparation trolley | Working table size | Max plate size 9000mmX2500mmX16mm | |
| Weight | 12000Kg | ||
| Driven and control | Reducer motor driven,transducer control | ||
| Electromagnetic chuck loading machine | Max capacity weight | 2850Kg | |
| Electromagnetic chuck | 22pieces,suction 2KN/pieces | ||
| Driven and control | Reducer motor driven,transducer control,gear-gear stripe transmission | ||
| Lift driven,control | Reducer motor driven,transducer control,chain transmission | ||
| Front feeding system | Clamping model | Hydraulic clamping: 3 units | |
| Feeding driven,control | Servo motor and Planetary reducer driven, all closed-loop control | ||
| Transmission,guide | High precision pinion and rack transmission, balls screw and linear guide guiding | ||
| Feeding precision | Position precision±0.1mm,repeated positioning accuracy 0.1mm | ||
| Feeding min margin | 120mm | ||
| Turnover mechanism in the plate end | Driven types | Cylinder driven, pinion transmission | Pressure16MPa |
| Turnover plate size | Length:3000-9000mm,Width:≤500 mm, | ||
| Machine shearing machine | Max cutting thickness | 16mm | σb≤450 MPa |
| Max cutting width | 9000mm | ||
| Max cutting force | 850KN | ||
| Shear angel | 0.5°~2.5° | Automatic adjustment | |
| Stroke | 4~8times/Minute | Full stroke | |
| Working table height | 700mm | ||
| Main motor | 45KW | ||
| Main pump | 125ml/R | ||
| Hydraulic system working pressure | 23Mpa | ||
| Oil tank capacity | 2000L | ||
| Back sheet supporting device | Lift, turnover driven model | Cylinder driven,Pressure16Mpa | |
| Max supporting plate size | 9000mmX1000X16mm | ||
| Back stacking and discharging trolley | Max products size | 9000mmX650X16mm | |
| Capacity weight | 8000Kg | ||
| front and back driven, control | Reducer motor driven,transducer control | ||
| station | with scrap, products and out-loading | ||
| Hydraulic system | with one set main hydraulic system, one set assistant hydraulic system, independent working | ||
| Electrical system | with running monitoring, system failure auto-alarm, system on-line diagnosis function |
Machine supply list
| No | Name | Specification | Quantity | Note |
| 1 | Main shear Machine | 16*9000 | one set | |
| 2 | Auxiliary Sheet preparation trolley | one set | ||
| 3 | Electromagnetic chuck loading machine | one set | ||
| 4 | Front feeding system | one set | ||
| 5 | Turnover mechanism in the plate end | one set | ||
| 6 | Back sheet supporting device | one set | ||
| 7 | Back stacking and discharging trolley | one set | ||
| 8 | Hydraulic system | one set | includn and assistant hydraulic systeming mai | |
| 9 | Electrical and CNC system | one set | ||
| 10 | Control cabinet | one set | ||
| 11 | Operation panel | one set | ||
| 12 | Safety protection | one set | including safety doors, ladder and sign and so on | |
| 13 | Machine repair tools | one set | ||
| 14 | Machine package and transportation | / | Seller | |
| 15 | Machine assembly and test | / | Seller | |
| 16 | Training | Life-long technical service. | ||
| 17 | Machine manual |
Machine main composition, structure, function and technical data
| Machine | Name | Data | Note |
| Auxiliary Sheet preparation trolley | Working table size | Max plate size 9000mmX2500mmX16mm | |
| Weight | 12000Kg | ||
| Driven and control | Reducer motor driven,transducer control | ||
| Electromagnetic chuck loading machine | Max capacity weight | 2850Kg | |
| Electromagnetic chuck | 22pieces,suction 2KN/pieces | ||
| Driven and control | Reducer motor driven,transducer control,gear-gear stripe transmission | ||
| Lift driven,control | Reducer motor driven,transducer control,chain transmission | ||
| Front feeding system | Clamping model | Hydraulic clamping: 3 units | |
| Feeding driven,control | Servo motor and Planetary reducer driven, all closed-loop control | ||
| Transmission,guide | High precision pinion and rack transmission, balls screw and linear guide guiding | ||
| Feeding precision | Position precision±0.1mm,repeated positioning accuracy 0.1mm | ||
| Feeding min margin | 120mm | ||
| Turnover mechanism in the plate end | Driven types | Cylinder driven, pinion transmission | Pressure16MPa |
| Turnover plate size | Length:3000-9000mm,Width:≤500 mm, | ||
| Machine shearing machine | Max cutting thickness | 16mm | σb≤450 MPa |
| Max cutting width | 9000mm | ||
| Max cutting force | 850KN | ||
| Shear angel | 0.5°~2.5° | Automatic adjustment | |
| Stroke | 4~8times/Minute | Full stroke | |
| Working table height | 700mm | ||
| Main motor | 45KW | ||
| Main pump | 125ml/R | ||
| Hydraulic system working pressure | 23Mpa | ||
| Oil tank capacity | 2000L | ||
| Back sheet supporting device | Lift, turnover driven model | Cylinder driven,Pressure16Mpa | |
| Max supporting plate size | 9000mmX1000X16mm | ||
| Back stacking and discharging trolley | Max products size | 9000mmX650X16mm | |
| Capacity weight | 8000Kg | ||
| front and back driven, control | Reducer motor driven,transducer control | ||
| station | with scrap, products and out-loading | ||
| Hydraulic system | with one set main hydraulic system, one set assistant hydraulic system, independent working | ||
| Electrical system | with running monitoring, system failure auto-alarm, system on-line diagnosis function |
Machine supply list
| No | Name | Specification | Quantity | Note |
| 1 | Main shear Machine | 16*9000 | one set | |
| 2 | Auxiliary Sheet preparation trolley | one set | ||
| 3 | Electromagnetic chuck loading machine | one set | ||
| 4 | Front feeding system | one set | ||
| 5 | Turnover mechanism in the plate end | one set | ||
| 6 | Back sheet supporting device | one set | ||
| 7 | Back stacking and discharging trolley | one set | ||
| 8 | Hydraulic system | one set | includn and assistant hydraulic systeming mai | |
| 9 | Electrical and CNC system | one set | ||
| 10 | Control cabinet | one set | ||
| 11 | Operation panel | one set | ||
| 12 | Safety protection | one set | including safety doors, ladder and sign and so on | |
| 13 | Machine repair tools | one set | ||
| 14 | Machine package and transportation | / | Seller | |
| 15 | Machine assembly and test | / | Seller | |
| 16 | Training | Life-long technical service. | ||
| 17 | Machine manual |
Machine main parts brand and original
| No | Name | Brand and original |
| 1 | Pump | VOITH |
| 2 | Main hydraulic parts | Beijing Huade, joint venture Rexroth. |
| 3 | Seal ring | NOK,Japan |
| 6 | Main electrical parts | SCHNEIDER |
| 7 | PLC | SIEMENS |
| 8 | Servo motor | YASKAWA,Japan |
| 9 | Balls screw | HIWIN, Taiwan |
| 10 | Linear guide | HIWIN, Taiwan |
| 11 | Pinion and rack | YYC,Taiwan |
| 12 | Reducer | Redsun, China |
| 13 | Electromagnetic chuck | China |
| 14 | Planetary gear | FASTON,Taiwan |
Packing: Coating with anti-rust oil on working surface, with plastic film layer for whole machine. Packed in container
Machine main parts brand and original
| No | Name | Brand and original |
| 1 | Pump | VOITH |
| 2 | Main hydraulic parts | Beijing Huade, joint venture Rexroth. |
| 3 | Seal ring | NOK,Japan |
| 6 | Main electrical parts | SCHNEIDER |
| 7 | PLC | SIEMENS |
| 8 | Servo motor | YASKAWA,Japan |
| 9 | Balls screw | HIWIN, Taiwan |
| 10 | Linear guide | HIWIN, Taiwan |
| 11 | Pinion and rack | YYC,Taiwan |
| 12 | Reducer | Redsun, China |
| 13 | Electromagnetic chuck | China |
| 14 | Planetary gear | FASTON,Taiwan |
Packing: Coating with anti-rust oil on working surface, with plastic film layer for whole machine. Packed in container
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.
After-sale-service:
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
standard.
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
service.
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.
