 |
| Quantity: | |
|---|---|
GD-40/1420*12200
TSD
Pipe end facing machine
Model:GD-40/1420*12200
Introduction.
No. | Product kind | (mm) Pipe specifications | Steel grade | Standards | (/) Out put per year(10,000 TON/YEAR) |
| 1 | Pipe production line pipe | Diameter:508~1422 Thickness:8~32 Length:8000~12200 | X70 | API 5L ISO 3183 GB/T 9711 DNV OS F101 | 10 |
Production capacity chart:
No. | Dia./mm | /mm Thickness | /mm Length | Production capacity |
| 1 | 508 | 8 | 12000 | 15 |
| 2 | 508 | 12.7 | 12000 | 15 |
| 3 | 508 | 15.9 | 12000 | 15 |
| 4 | 610 | 8 | 12000 | 14 |
| 5 | 610 | 12.7 | 12000 | 14 |
| 6 | 610 | 18.4 | 12000 | 14 |
| 7 | 610 | 25.4 | 12000 | 14 |
| 8 | 660 | 8 | 12000 | 14 |
| 9 | 660 | 12.7 | 12000 | 14 |
| 10 | 660 | 25.4 | 12000 | 14 |
| 11 | 711 | 8.7 | 12000 | 12 |
| 12 | 711 | 16.0 | 12000 | 12 |
| 13 | 711 | 25.4 | 12000 | 12 |
| 14 | 813 | 10.3 | 12000 | 12 |
| 15 | 813 | 20.6 | 12000 | 12 |
| 16 | 813 | 31.8 | 12000 | 12 |
| 17 | 914 | 11.1 | 12000 | 11 |
| 18 | 914 | 22.2 | 12000 | 11 |
| 19 | 914 | 31.8 | 12000 | 11 |
| 20 | 1016 | 12.7 | 12000 | 10 |
| 21 | 1016 | 20.6 | 12000 | 10 |
| 22 | 1016 | 31.8 | 12000 | 10 |
| 23 | 1016 | 32.0 | 12000 | 10 |
| 24 | 1219 | 12.7 | 12000 | 10 |
| 25 | 1219 | 18.3 | 12000 | 10 |
| 26 | 1219 | 22.2 | 12000 | 10 |
| 27 | 1219 | 32.0 | 12000 | 9 |
| 28 | 1422 | 17.8 | 12000 | 9 |
| 29 | 1422 | 21.4 | 12000 | 9 |
| 30 | 1422 | 32 | 12000 | 8 |
Pipe condition
| No. | Item | Specifications | Remarks |
| 1 | Straightness | 0.2%L | |
| 2 | Ellipse deviation of pipe | 1.2 %( max) | |
| 3 | Radius tolerance | ±1.6mm | |
| 4 | Total power of machine | 400KW About 400KW | |
| 5 | Total weight | 184 T | |
| Environment and energy resources condition | |||
| 1 | () Indoors environment temperature | 5~+40ºC | |
| 2 | Environments humidity | ≤90% | |
The control has to be matched with following
Power supply voltage: 380V ±10%(TN-
Frequency: 50
Control voltage: 220 VAC / 24 VDC
1.5.4.:0.4~0.6Mpa Compressed air: 0.4~0.6Mpa
Cooling water: (clean and cycle water used for cooling of hydraulic unit)
Pressure:0.3-0.6MPa (T.O.P)
PH:7-8
Suspended material:50-100 mg/L
Hardness: 7-110dH
Particle: : Max. 0.06 mm
Sulphate:<400 mg/L
Inlet temperature:<33 ºC
Flow voltage:30/ (M3/H)
Technical specification
| No. | Item | Specifications | Remarks |
| 1 | Pipe length | 8~12.2m | |
| 2 | Outside diameter of pipe | φ508~φ1422mm | |
| 3 | Pipe wall thickness | 8~32 mm | |
| 4 | Material | X70 | |
| 5 | Pipe end condition | 150mm,0.5mm; The welding seam should be as flat as raw pipe wall, plus aviation should be within 0.5mm | |
| 6 | Pipe end bevel | ( 30°~35°/22°~25°)as per technical specification (30°~35°/22°~25°) | |
| 7 | Foot face measurement | ≥1.6±0.6 mm | |
| 8 | Bevel of pipe end | ≤1.6mm | |
| 9 | Facing style | 2 ends of one pipe facing at same time | |
| 10 | Applied standards | API 5L GB/T9711.1 GB/T9711.2; | |
| 11 | Production capacity | 10-12/(Ø710×20) 9-10/(Ø1016×32) 10-12 pic/h (Ø710×20) 8---10 pic/h (Ø1016×32) |
Pipe end facing machine
Model:GD-40/1420*12200
Introduction.
No. | Product kind | (mm) Pipe specifications | Steel grade | Standards | (/) Out put per year(10,000 TON/YEAR) |
| 1 | Pipe production line pipe | Diameter:508~1422 Thickness:8~32 Length:8000~12200 | X70 | API 5L ISO 3183 GB/T 9711 DNV OS F101 | 10 |
Production capacity chart:
No. | Dia./mm | /mm Thickness | /mm Length | Production capacity |
| 1 | 508 | 8 | 12000 | 15 |
| 2 | 508 | 12.7 | 12000 | 15 |
| 3 | 508 | 15.9 | 12000 | 15 |
| 4 | 610 | 8 | 12000 | 14 |
| 5 | 610 | 12.7 | 12000 | 14 |
| 6 | 610 | 18.4 | 12000 | 14 |
| 7 | 610 | 25.4 | 12000 | 14 |
| 8 | 660 | 8 | 12000 | 14 |
| 9 | 660 | 12.7 | 12000 | 14 |
| 10 | 660 | 25.4 | 12000 | 14 |
| 11 | 711 | 8.7 | 12000 | 12 |
| 12 | 711 | 16.0 | 12000 | 12 |
| 13 | 711 | 25.4 | 12000 | 12 |
| 14 | 813 | 10.3 | 12000 | 12 |
| 15 | 813 | 20.6 | 12000 | 12 |
| 16 | 813 | 31.8 | 12000 | 12 |
| 17 | 914 | 11.1 | 12000 | 11 |
| 18 | 914 | 22.2 | 12000 | 11 |
| 19 | 914 | 31.8 | 12000 | 11 |
| 20 | 1016 | 12.7 | 12000 | 10 |
| 21 | 1016 | 20.6 | 12000 | 10 |
| 22 | 1016 | 31.8 | 12000 | 10 |
| 23 | 1016 | 32.0 | 12000 | 10 |
| 24 | 1219 | 12.7 | 12000 | 10 |
| 25 | 1219 | 18.3 | 12000 | 10 |
| 26 | 1219 | 22.2 | 12000 | 10 |
| 27 | 1219 | 32.0 | 12000 | 9 |
| 28 | 1422 | 17.8 | 12000 | 9 |
| 29 | 1422 | 21.4 | 12000 | 9 |
| 30 | 1422 | 32 | 12000 | 8 |
Pipe condition
| No. | Item | Specifications | Remarks |
| 1 | Straightness | 0.2%L | |
| 2 | Ellipse deviation of pipe | 1.2 %( max) | |
| 3 | Radius tolerance | ±1.6mm | |
| 4 | Total power of machine | 400KW About 400KW | |
| 5 | Total weight | 184 T | |
| Environment and energy resources condition | |||
| 1 | () Indoors environment temperature | 5~+40ºC | |
| 2 | Environments humidity | ≤90% | |
The control has to be matched with following
Power supply voltage: 380V ±10%(TN-
Frequency: 50
Control voltage: 220 VAC / 24 VDC
1.5.4.:0.4~0.6Mpa Compressed air: 0.4~0.6Mpa
Cooling water: (clean and cycle water used for cooling of hydraulic unit)
Pressure:0.3-0.6MPa (T.O.P)
PH:7-8
Suspended material:50-100 mg/L
Hardness: 7-110dH
Particle: : Max. 0.06 mm
Sulphate:<400 mg/L
Inlet temperature:<33 ºC
Flow voltage:30/ (M3/H)
Technical specification
| No. | Item | Specifications | Remarks |
| 1 | Pipe length | 8~12.2m | |
| 2 | Outside diameter of pipe | φ508~φ1422mm | |
| 3 | Pipe wall thickness | 8~32 mm | |
| 4 | Material | X70 | |
| 5 | Pipe end condition | 150mm,0.5mm; The welding seam should be as flat as raw pipe wall, plus aviation should be within 0.5mm | |
| 6 | Pipe end bevel | ( 30°~35°/22°~25°)as per technical specification (30°~35°/22°~25°) | |
| 7 | Foot face measurement | ≥1.6±0.6 mm | |
| 8 | Bevel of pipe end | ≤1.6mm | |
| 9 | Facing style | 2 ends of one pipe facing at same time | |
| 10 | Applied standards | API 5L GB/T9711.1 GB/T9711.2; | |
| 11 | Production capacity | 10-12/(Ø710×20) 9-10/(Ø1016×32) 10-12 pic/h (Ø710×20) 8---10 pic/h (Ø1016×32) |
