Floor Deck Roll Forming Machine
1. PLC computer control
2. No noise, no shake
3. Hydraulic system, long operating
4. Easy operation
Main technical parameter
1.manual decoile:rmanual expanding,passive uncoil
Inner Diameter. Φ460-520mm
Outer Diameter. Φ1400mm
2.weight capacity of decoiler:10T
3.machine stand: welded shape steel
4.type of forming machine:wallboard type with chain transmission
5.diameter of shaft: 85mm
6.material of shaft: high-grade 45 steel
8.motor power of forming machine:11KW*2
10. roll station:30 stations(according profile)
11. material of roller :high-grade 45 steel
12. surface of roller coated with chrome 0.05mm thickness
13. motor of hydraulic station:4KW
14. hydraulic oil pump:bear pump CB-E314
15. type of cutting:hydraulic cutting
16. material of cutting blade:Cr12
17. heat treatment of cutting blade:HRC58°-60°
18. thickness of steel coil:0.6-1.5mm
19. tolerance of length:10±2mm
20. transducer: Panasonic
21. computer adopts Panasonic PLC
22. computer operating board adopts Touch screen
23. Voltage: 380V 3 phase 50HZ or at buyer's requirement
Manual decoiler→ feed with guide→ roll forming→ cutting with fixed length→ output with table
Manual decoiler,main forming machine,hydraulic cutting device,hydraulic station,PLC computer control,output table
1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
management system in our company and on our products.
All products before ex-works have been strictly tested and are in conformity with technical agreement and
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
to guide the installation, testing and training the operators from 7 days to 45 days after the machine
reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
(USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
free to contact the Seller.
If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
which is helpful for customers' special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
failure description, clear pictures and videos, if possible.
Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
service at lowest cost.