Specifications 1. PLC computer control 2. No noise, no shake 3. Hydraulic system, long operating 4. Easy operation 5. Maintenance-free Introducation
This machine is made up of roll forming machine, molding press, cutting machine, PLC computer control and hydraulic system The machine is stable, no noise, no shake Controlling by computer, PLC display, operation is easy, running is steady and reliable, endurable, maintenance-free Cutting machine is characterized by stable driving, easy operation Hydraulic system use the CDF-10 hydraulic pump, long operating life, no noise This machine is applies to roof fortification Flow chart:
Decoilling the sheet--sheet guilding--film covering--roll forming--measure length--cutting the panel--panel to the supporter
Machine Feature: 1. Precise forming 2. High-solid forming stand guarantees the goods and uniform high quality of final productd 3. The operation automatically minimizes the tolerance of cutting length
Products Feature: 1. A stylish and attractive design, giving the appearance of a traditional roof tile. 2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models. 3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
Technical Parameters: Material Spec: Colored steel sheet; Galvanized steel sheet Thickness of coil sheet: 0.3-0.8mm Main Motor Power: 4 kw Forming Speed: 2.0-3.0m/min Hydraulic station power: 3kw Quantity of stand: About 14 or 16 stands Hydraulic pressure: 10-12mpa Controlling system: PLC Index error of length: 10m+2mm Total weight: About 6 tons Voltage: 380V 3phase 60 HZ or at buyer's requirement
Material of main equipment
Roller material: High grade NO. 45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active shaft material: High grade NO. 45 carbon wrought steel at 過 72mm Cutting blade: Cr12 mould steel with quenched treatment.
Specifications 1. PLC computer control 2. No noise, no shake 3. Hydraulic system, long operating 4. Easy operation 5. Maintenance-free Introducation
This machine is made up of roll forming machine, molding press, cutting machine, PLC computer control and hydraulic system The machine is stable, no noise, no shake Controlling by computer, PLC display, operation is easy, running is steady and reliable, endurable, maintenance-free Cutting machine is characterized by stable driving, easy operation Hydraulic system use the CDF-10 hydraulic pump, long operating life, no noise This machine is applies to roof fortification Flow chart:
Decoilling the sheet--sheet guilding--film covering--roll forming--measure length--cutting the panel--panel to the supporter
Machine Feature: 1. Precise forming 2. High-solid forming stand guarantees the goods and uniform high quality of final productd 3. The operation automatically minimizes the tolerance of cutting length
Products Feature: 1. A stylish and attractive design, giving the appearance of a traditional roof tile. 2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models. 3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
Technical Parameters: Material Spec: Colored steel sheet; Galvanized steel sheet Thickness of coil sheet: 0.3-0.8mm Main Motor Power: 4 kw Forming Speed: 2.0-3.0m/min Hydraulic station power: 3kw Quantity of stand: About 14 or 16 stands Hydraulic pressure: 10-12mpa Controlling system: PLC Index error of length: 10m+2mm Total weight: About 6 tons Voltage: 380V 3phase 60 HZ or at buyer's requirement
Material of main equipment
Roller material: High grade NO. 45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active shaft material: High grade NO. 45 carbon wrought steel at 過 72mm Cutting blade: Cr12 mould steel with quenched treatment.
1. Precise forming 2. High-solid forming stand guarantees the goods and uniform high quality of final productd 3. The operation automatically minimizes the tolerance of cutting length
1. Precise forming 2. High-solid forming stand guarantees the goods and uniform high quality of final productd 3. The operation automatically minimizes the tolerance of cutting length
1. A stylish and attractive design, giving the appearance of a traditional roof tile. 2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models. 3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
1. A stylish and attractive design, giving the appearance of a traditional roof tile. 2. Resistant to frost, heat, hail and gales; 100% waterproof, due to the lateral run-off channel on each sheet for several models. 3. The raw material can be in different color, with elegant and noble looking. It is widely used as the garden like factory, hotel, exhibition, villa, civil construction etc.
Material Spec: Colored steel sheet; Galvanized steel sheet Thickness of coil sheet: 0.3-0.8mm Main Motor Power: 4 kw Forming Speed: 2.0-3.0m/min Hydraulic station power: 3kw Quantity of stand: About 14 or 16 stands Hydraulic pressure: 10-12mpa Controlling system: PLC Index error of length: 10m+2mm Total weight: About 6 tons Voltage: 380V 3phase 60 HZ or at buyer's requirement
Material of main equipment
Roller material: High grade NO. 45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active shaft material: High grade NO. 45 carbon wrought steel at 過 72mm Cutting blade: Cr12 mould steel with quenched treatment.
Material Spec: Colored steel sheet; Galvanized steel sheet Thickness of coil sheet: 0.3-0.8mm Main Motor Power: 4 kw Forming Speed: 2.0-3.0m/min Hydraulic station power: 3kw Quantity of stand: About 14 or 16 stands Hydraulic pressure: 10-12mpa Controlling system: PLC Index error of length: 10m+2mm Total weight: About 6 tons Voltage: 380V 3phase 60 HZ or at buyer's requirement
Material of main equipment
Roller material: High grade NO. 45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm
Active shaft material: High grade NO. 45 carbon wrought steel at 過 72mm Cutting blade: Cr12 mould steel with quenched treatment.
Previous:
Next:
Quality First, Customer First
TSD's R&D center is awarded as National R&D Center.We're pleased to get your Inquiry and we will come back to as soon as possible. More
