 |
| Quantity: | |
|---|---|
Characteristics:
- Computer optimized vertical C-frame structure with high rigidity
- Attractive and neat appearance, with driving system inside the frame
- Manual directional control valve is adopted in hydraulic system for easy speed regulation
- Handle operation or Pedal operation at operator's choice
- Stroke and pressure can be adjusted within specified scope.
Options
- Straightening table
| No. | Technical parameters | Unit | Y41-16 | Y41-25 | Y41-40 | Y41-63 | Y41-100 | Y41-160 | Y41-200 | Y41-315 | Y41-400 | |
| 1 | Nominal pressure | kN | 160 | 250 | 400 | 630 | 1000 | 1600 | 2000 | 3150 | 4000 | |
| 2 | Max.hydraulic pressure | kN | 20 | 16 | 16 | 25 | 25 | 25 | 25 | 25 | 25 | |
| 3 | Stroke of slide | Mpa | 400 | 400 | 400 | 500 | 600 | 700 | 700 | 800 | 800 | |
| 4 | Daylight | mm | 500 | 630 | 630 | 750 | 800 | 900 | 1000 | 1100 | 1250 | |
| 5 | Throat depth | mm | 250 | 350 | 350 | 320 | 400 | 420 | 450 | 800 | 1500 | |
| 6 | Speed of slide | Descent | mm/s | 80 | 80 | 120 | 100 | 80 | 80 | 80 | 80 | |
| Pressing | 18-20 | 18-20 | 18-20 | 18-20 | 15-20 | 10-12 | 10-15 | 8-10 | 10-12 | |||
| Returning | 50 | 75 | 75 | 100 | 100 | 70 | 70 | 60 | 55 | |||
| 7 | Effective area of working table | L-R | mm | 500 | 580 | 700 | 710 | 800 | 900 | 900 | 1500 | 2000 |
| F-B | 450 | 570 | 570 | 600 | 700 | 800 | 900 | 1500 | 1800 | |||
| 8 | Height from working table to floor | mm | 710 | 710 | 710 | 810 | 800 | 900 | 900 | 1400 | 1400 | |
| 9 | Diameter of dropping hole | mm | 100 | 100 | 100 | |||||||
| 10 | Motor power | kW | 4 | 5.5 | 5.5 | 7.5 | 7.5 | 11 | 15 | 22 | 22 | |
Characteristics:
- Computer optimized vertical C-frame structure with high rigidity
- Attractive and neat appearance, with driving system inside the frame
- Manual directional control valve is adopted in hydraulic system for easy speed regulation
- Handle operation or Pedal operation at operator's choice
- Stroke and pressure can be adjusted within specified scope.
Options
- Straightening table
| No. | Technical parameters | Unit | Y41-16 | Y41-25 | Y41-40 | Y41-63 | Y41-100 | Y41-160 | Y41-200 | Y41-315 | Y41-400 | |
| 1 | Nominal pressure | kN | 160 | 250 | 400 | 630 | 1000 | 1600 | 2000 | 3150 | 4000 | |
| 2 | Max.hydraulic pressure | kN | 20 | 16 | 16 | 25 | 25 | 25 | 25 | 25 | 25 | |
| 3 | Stroke of slide | Mpa | 400 | 400 | 400 | 500 | 600 | 700 | 700 | 800 | 800 | |
| 4 | Daylight | mm | 500 | 630 | 630 | 750 | 800 | 900 | 1000 | 1100 | 1250 | |
| 5 | Throat depth | mm | 250 | 350 | 350 | 320 | 400 | 420 | 450 | 800 | 1500 | |
| 6 | Speed of slide | Descent | mm/s | 80 | 80 | 120 | 100 | 80 | 80 | 80 | 80 | |
| Pressing | 18-20 | 18-20 | 18-20 | 18-20 | 15-20 | 10-12 | 10-15 | 8-10 | 10-12 | |||
| Returning | 50 | 75 | 75 | 100 | 100 | 70 | 70 | 60 | 55 | |||
| 7 | Effective area of working table | L-R | mm | 500 | 580 | 700 | 710 | 800 | 900 | 900 | 1500 | 2000 |
| F-B | 450 | 570 | 570 | 600 | 700 | 800 | 900 | 1500 | 1800 | |||
| 8 | Height from working table to floor | mm | 710 | 710 | 710 | 810 | 800 | 900 | 900 | 1400 | 1400 | |
| 9 | Diameter of dropping hole | mm | 100 | 100 | 100 | |||||||
| 10 | Motor power | kW | 4 | 5.5 | 5.5 | 7.5 | 7.5 | 11 | 15 | 22 | 22 | |
