2 Axis NC Hydraulic Press Brake (WE67K-250/5000)
Home » Products » Press Brake » NC Press Brake » 2 Axis NC Hydraulic Press Brake (WE67K-250/5000)

Related News

content is empty!

Share to:

2 Axis NC Hydraulic Press Brake (WE67K-250/5000)

  • WE67K-250/5000
  • TSD

Torsion Bar Press Brake
Model WE67K-250/5000

- Designing by ANSYS, and Optimizing by simulation model
- ASTM283M Gr.D steel to be used for fully welded construction
-Table, Upright & Ram designed as full rigidity to ensure full loading working
- Right-and-left oil cylinder synchronization (Y1,Y2) achieved by separated Germany  electrical-hydraulic proportional valve with high stability .
- Fully closed loop control with high precision 
- Oil cylinder crowning in table - Installing faying surfaces of oil cylinders, linear guide, working table processed at one time by heavy
-duty floor milling machine with good parallelism and perpendicularity
- Eccentric loading working available
- Standard top tool and multi
-Vee bottom tool 
- Standard back gauge with X axis and manually adjusting R axis
- Overloading overflow protection

NC press brake

Technical Specifications

Nominal pressure 2500 kN
Length of table5000 mm
Center distance between uprights4300 mm
Throat 400 mm 
Stroke of ram  250 mm 
Max. open height 520 mm 
Speed: Approaching 100mm/s
Returning 120mm/s
Main motor power18.5kW
Overall dim.(L*W*H above floor)5060×2390×3200mm

Nominal force
Length of table (mm)Distance between uprights(mm)Throat depth
Ram stroke(mm) Open height (mm) working table height(mm) working table width(mm)   Ram speed                           Main motor power
Overall dimensions(L×W×H)(cm)Weight()
Approaching     working  Return 

Standard configuration: 
- CNC system DA52 up,Delem,Holland/DNC880S,Cybelec, Switzerland/ESA S530,Italy
- Electrical-hydraulic proportional synchronous valve group: Hoerbiger/Bosch,Germany
- Main electrical components: Schneider
- Optical scale Givi, Italy      
- Gear pump with low noise: Nachi, Japan
- Main oil cylinder seal ring: NOK,Japan
- Ball screw and linear guide: ABBA, Taiwan
- Electrical cabinet wind cooling 

-Throat depth
-Top and bottom tools
-Back gauge with R, Z axis
-Light curtain
-Oil cooler/warmer
-CE certificate

Production technological process
Steel plate to warehouse →physical & chemical inspection→ steel plate ball blasting (dustproof) processing → cutting through CNC flame cutting machine → cutting and processing to each welding junction plane → compound welding→ Air protecting welding → Stress relief by electrical furnace →processing through heavy-duty floor  type boring and milling machine, heavy-duty gantry milling machine → Fabrication.  

Packing: Coating with anti-rust oil on working surface, with plastic film layer for whole machine. Packed in container or in bulk.

1. The Seller has passed ISO9001 quality system certification since 1997, and always execute strictly this quality
    management system in our company and on our products.
   All products before ex-works have been strictly tested and are in conformity with technical agreement and
2. Warranty is one year since the date of B/L, or final acceptance date of heavy duty machinery. Longer warranty
    could be purchased by the user.
3. Commissioning: For heavy-duty machinery, the Seller sends technicians (electrical hydraulic & mechanical)
    to guide the installation, testing and training the operators from 7 days to 45 days after the machine  
    reaches the factory of user. But the round-trip air tickets, local accommodation and allowance
   (USD100/person·day) in the User's country will be burdened by the Buyer. The above charges do not be
    included in the offer. This clauses will be shown in the contract.
3. For middle and small standard machinery, it is easy to operate according to operating manual. The User is
    firstly suggested to carefully read operating manual, then start the machine. Any unclear issues, please feel
    free to contact the Seller.  
    If the User insists on supplying the technical service at use's factory, please refer to No.2 clauses of after-sale-
4. All products of the Seller can be tracked by Ex-works number. Spare parts can be supplied same as the former,
    which is helpful for customers'  special designing requirements.
5. Consumable parts can be supplied free of charge to customer within one year warranty from B/L date, and the
    long term technical consultant service is available.
6. Common failure could be solved by E-mail, Phone and long distance video diagnose. The User must supply full
    failure description, clear pictures and videos, if possible.
    Once the serious quality problem is appeared due to the Seller's manufacturing reason within one year since
    B/L date or final acceptance date of heavy duty machinery. The Seller will send their technician to repair it .
7. After one year warranty, the Seller will provide free technical consultation and spare parts and technician
    service at lowest cost. 

Quality First, Customer First

TSD's R&D center is awarded as National R&D Center.We're pleased to get your Inquiry and we will come back to as soon as possible.

Share It

Quick Links

Contact Us

Mobile: +86-13830852097
Head officeNorth Weibin Road,Maiji
District,Tianshui City,Gansu Province 741020 P.R.China

​Copyright © Tianshui Metalforming Machine Tool (Group) Co., Ltd.    Sitemap
Technology by leadong